INCREASING THE WORKING PRODUCTIVITY OF THE CASE 1150 L BULLDOZER BY IMPROVING THE WORKING EQUIPMENT

Authors

Ruziqulov Jasur Uktam ugli Bukhara Institute of Natural Resources Management of the National Research University of Tashkent Institute of Irrigation and Agricultural Mechanization Engineers foundation doctoral student
Isakov Zafarjon Shuxrat ugli Bukhara Institute of Natural Resources Management of the National Research University of Tashkent Institute of Irrigation and Agricultural Mechanization Engineers intern researcher
Qurbonboyev Sindorbek Sarvarbek ugli, Ruziqulova Dilnoza Uktamovna, Xusinov Sarvarbek Nodirbek ugli Bukhara Institute of Natural Resources Management of the National Research University of Tashkent Institute of Irrigation and Agricultural Mechanization Engineers students

Keywords:

Bulldozer, working equipment, softener, roller, hinge, tooth with twisting (overturning) softener, knife, rib.

Abstract

In this article, bulldozers adapted to work on hard and frozen soils without a pre-softener cannot be implemented without their special working equipment. This, in turn, leads to the destruction of the working equipment during the operation of the bulldozer, at the same time excessive forces fall on the machine, and it leads to a decrease in the quality of work and productivity. The problems of solving the above problems and achieving high productivity by improving the working equipment of the bulldozer are described.

Downloads

Published

2022-12-24

How to Cite

Ruziqulov Jasur Uktam ugli, Isakov Zafarjon Shuxrat ugli, & Qurbonboyev Sindorbek Sarvarbek ugli, Ruziqulova Dilnoza Uktamovna, Xusinov Sarvarbek Nodirbek ugli. (2022). INCREASING THE WORKING PRODUCTIVITY OF THE CASE 1150 L BULLDOZER BY IMPROVING THE WORKING EQUIPMENT. Neo Science Peer Reviewed Journal, 4, 87–90. Retrieved from https://neojournals.com/index.php/nsprj/article/view/83